Step 2 – Stack the Pieces to Measure to Create the Case Put a small block of wood along the line and clamp it securely in place. Measure from the end of the cut and mark the board at 10.5-inches.
Clamp a piece of scrap wood to your chop saw and cut part ways through it. A great way to make these cuts very quickly is to make a jig. You’ll make several pieces out of each 2×4. Tight, small knots are something you can get away with, but you’ll want the pieces to be so smooth that they glide against one another without having to sand them. This is far from traditional finish lumber, or you can look for premium-quality 2x4s that come with fewer knots. You may want to pay a little more for construction-grade stud lumber. Pick out the 2x4s that have as few knots in the wood as possible. Finish for outside of box (lacquer or polyurethane).Door hardware including a door clasp and small hinges.6 – 8 foot 2×4’s and 1/2 inch or 3/4 inch plywood for your case.After you stack all of the blocks following this pattern, you’ll get a tower that is 18 layers tall. You follow this by another layer of three that you turn 90° and put on top of the previous row. Traditionally, any jenga game you get has 54 pieces, and one block needs to be as long as the width of three blocks laid side by side.
#Back yard jenga how to
How to Create a Traditional Yard Jenga Set – Step by Step
0 kommentar(er)
